	Article Directory		Article Submission Service		Article Marketing Blog		Publishers		Member Log In

Article Directory :: Social Articles

10 Basic Strategies to Building a Business Card Holder

By Patricia Strasser

Republish: EasyPublish™
Published: 20Jan2012
Word count: 674
Viewed: 133 time(s)

Get Free Content For Your Site

You can create a business card holder on your own. To perform this you have to prepare the essential elements and tools, position a sheet of wax paper above your own work place, install 3 popsicle sticks together using the glue, fasten another 4 popsicle sticks jointly, glue another 2 popsicle sticks collectively, remove 1 ¼ inches off the upper and base portion of 4 popsicle sticks, fasten the sticks from the third phase with the sticks on the fourth stage, fasten the 2 sticks in the fifth step behind the sticks in the 4th phase, utilise sticks in the 6th step to design the sides of the cardholder, and customise your card holder with the diverse embellishments.

A company cardholder is common but very useful device for keeping your vital cards arranged and easy to seek out. There are thousands of styles of business card holders, and you can attempt to construct one on your own. Follow these ten basic guidelines if you wish to develop your own enterprise card holder.

Get ready the essential elements as well as instruments

You must have 11 pieces of popsicle sticks, green colored craft paper, glue, different adornment and decorations, wax paper and two scissors.

Place a sheet of wax paper over your work area

Before you start, you have to ensure that your work place is protected and will not be exposed to messes or even spills. To accomplish this you will need to protect your worktop using a sheet of wax paper.

Connect 3 popsicle sticks collectively using the glue

Lay down 3 pieces of the pop-sicle sticks on the paper. You have to put these three by their sides by making use of adhesive on the surface area. Right after using the adhesive, hold the sticks together for approximately half a minute in order that they will cling.

Glue one more four pop-sicle sticks jointly

Obtain another four popsicle sticks and lay them beside each other. You will need to glue them by their sides just like you did before. Put on glue on the areas of the sides and hold them together to be sure they stick.

Glue one more 2 pop-sicle sticks together

Have another two pop-sicle sticks then glue them together as you made before. Be sure that you use the glue on their sides.

Take off 1 ¼ inches off the top as well as lower area of four pop-sicle sticks

You'll need to slice off one ¼ inches off out of another 2 bits of pop-sicle sticks utilizing the set of scissors. Once you've cut them to the specified size, lay down them sideways after which place them collectively by using glue. It is important to repeat this particular stage using the other two popsicle sticks.

Fasten the sticks from the third stage using the sticks on the fourth stage

Take the three sticks that you glued together in stage 3 and glue all of them jointly using the four sticks you fixed jointly in phase 4. Make certain they develop a right angle at the top area of the sticks.

Glue the two sticks in the 5th stage at the back of the sticks in the fourth stage

Take the 2 sticks that you glued jointly in the 5th phase and and then fasten them together with the 4 sticks in the 4th step. This specific stage should result in a U-shape.

Use the sticks in the sixth step to make the sides of the cardholder

The particular sticks that you chop in the sixth stage can be helpful to shape the sides of your own card holder. This can be accomplished by sticking them to the other sticks.

Customizing your own cardholder with the distinctive embellishments

Now you can customise the cardholder applying the varied adornments and also decorations that you made.

The great thing about doing this project is that you can add your own unique touch to make the resulting business card holder more personalized.

Written by Patricia Strasser. If you're looking for ready-made business card holders, pay a visit to http://www.everydayplastics.com/BusinessCardHolderInsertPages.php

EasyPublish™ this article - publishers click here